PDA

View Full Version : Technical: timing- what does a properly-timed barrel look like?


stimpsonjcat
December 21, 2000, 10:59
This photo shows a properly timed barrel.
This is after hand tightening...before using the wrench.

http://www.alltel.net/~jbperry/4dl/timed.jpg

peace!

ulfrikr
March 29, 2003, 10:33
Photo? I think we may have a case of link-rot here.

Can you re-up the photo, Stimpy?

stimpsonjcat
March 31, 2003, 10:45
Fixed!!!

Sorry about that folks...I have piles of photos on my page I forget are tied to active links.

I think I need to buy some more space out there.

R.S.B.
July 20, 2005, 13:38
I can't see any Pics, is it because this is an old thread?

My first build, would like to see what a 11 o'clock position looks like.

Please

crcksht
July 20, 2005, 14:07
Originally posted by R.S.B.
I can't see any Pics, is it because this is an old thread?

My first build, would like to see what a 11 o'clock position looks like.

Please

http://www.angelfire.com/super2/crcksht/11.txt

:)

Jon Frum
July 23, 2005, 17:52
Make it 5 til 11 on the front sight, hand tight, crank the barrel to 12 with wrench. Ye haw!

W.E.G.
July 23, 2005, 19:51
Make it a "triangle."

http://www.falfiles.com/forums/attachment.php?s=&postid=467766

http://www.falfiles.com/forums/attachment.php?s=&postid=846937

Speedfish
July 09, 2006, 17:04
W.E.G.,
that appears to be a metric barrel. Does anyone have a pic of an inch barrel hand timed to add? I ask because the flat on the top is so much wider on the inch vs the metric barrel.
Thanks,
Speedfish