PDA

View Full Version : dillon xl650


merrden
August 12, 2007, 12:23
Hi guys: I just bought a guy out getting his dillon xl 650 7 set ups, tumbler, scales, puller reloading library and a casting outfit as well. However I am looking for a deal on a swager, conversion kits particularly .223 and 7.62x39 now. later will want 7.62x54, 44 mag. 45 lc. 38/357,(right now I load 40 calibers on a hand press stopped because mil spec was plentiful and cheap) more tool heads,stands, and a lot of componants to feed this thing 150 gr. .308,.303, 124 - 125 gr. .310/.311, 170gr .323, .308, .303, 55 - 60 gr .223, 45 230gr, 210, 200, paid out $750.00 for 1400 rds of mil spec 7.62 x 51, 100 ea. boxer primed .303, 7.62x54, and 150 7.62 x 54mil on strippers mil spec catching up to reloads and drying up. Sportsmans warehouse sells softpoints cheaper than fmjs. Been stashing for years I will have a fairly new set of 243 dies. I have a set of Texas dies that I bought new and only loaded 20 - 40 rounds on for sale or trade.
There is a new Lyman scale and a Lyman pro vibrating tumbler that may come up for grabs as I replace the tumbler with a larger one. Need to find out who needs what as I am also a gem cutter, knifemaker, machinist. I need a really good lathe that does mm. standard. threads as many as possible, taper atatchment, speeds from 30 - 40 rpm - 1 - 2 k, 13 - 16 inch swing, 30 + inch between centers, 220 - 230volt, tight best shape, tooling 3 & 4 jaw, face plate, jacobs chuck, collet set up EtC. This is a hard trick for a poor yard boy who works in a plant moving most operations (40 - 60%) to Mexico. Would somebody PLEASE help me sell some houses (part time Realtor in Tn. & Ga. do relocations all over the world)to feed my addiction. Please advise. Contact: meerrden@comcast.net

Later

Dudes

MAINER
August 12, 2007, 13:29
http://www.dillonprecision.com/#/content/p/9/pid/24494/catid/4/Dillon_Rifle_Dies__Three_Die_Sets_

Dillons work best with Dillon dies. Besides, in .223 and .308 ya get carbide.

Can't help with the other stuff, too many numbers, makes my head hurt! :eek:

Don't have a lathe an don't want to live in Ga. B'sides, have enough problems with house I got now. :cry:

Sounds like fun to have a 650 an a bunch of gadgets to go with it!! :cool:

jerrymrc
August 12, 2007, 21:46
Originally posted by merrden
Hi guys: I just bought a guy out getting his dillon xl 650 7 set ups, tumbler, scales, puller reloading library and a casting outfit as well. However I am looking for a deal on a swager, conversion kits particularly .223 and 7.62x39 now. later will want 7.62x54, 44 mag. 45 lc. 38/357,(right now I load 40 calibers on a hand press stopped because mil spec was plentiful and cheap) more tool heads,stands, and a lot of componants to feed this thing 150 gr. .308,.303, 124 - 125 gr. .310/.311, 170gr .323, .308, .303, 55 - 60 gr .223, 45 230gr, 210, 200, paid out $750.00 for 1400 rds of mil spec 7.62 x 51, 100 ea. boxer primed .303, 7.62x54, and 150 7.62 x 54mil on strippers mil spec catching up to reloads and drying up. Sportsmans warehouse sells softpoints cheaper than fmjs. Been stashing for years I will have a fairly new set of 243 dies. I have a set of Texas dies that I bought new and only loaded 20 - 40 rounds on for sale or trade.
There is a new Lyman scale and a Lyman pro vibrating tumbler that may come up for grabs as I replace the tumbler with a larger one. Need to find out who needs what as I am also a gem cutter, knifemaker, machinist. I need a really good lathe that does mm. standard. threads as many as possible, taper atatchment, speeds from 30 - 40 rpm - 1 - 2 k, 13 - 16 inch swing, 30 + inch between centers, 220 - 230volt, tight best shape, tooling 3 & 4 jaw, face plate, jacobs chuck, collet set up EtC. This is a hard trick for a poor yard boy who works in a plant moving most operations (40 - 60%) to Mexico. Would somebody PLEASE help me sell some houses (part time Realtor in Tn. & Ga. do relocations all over the world)to feed my addiction. Please advise. Contact: meerrden@comcast.net

Later

Dudes

Slow down on the Meth.... Please.:uhoh: