PDA

View Full Version : First build, first problem


deepriverman
June 11, 2007, 11:54
I'm building on a new DSA receiver. Have a very good reparked Imbel kit. Tried to hand turn in barrel to see how it would time. Only got it in 3-4 threads before it bound up to hand pressure. Barrel threads look heavily parked. Wire brush, valve compound? Don't want to screw this up. Thanks.

scattergun
June 11, 2007, 13:26
Do you have the receiver stub from the kit? If so, start twisting it on and off the barrel to clean up the threads, use the valve compund if necessary I guess.

chromestarhustler
June 11, 2007, 13:28
got your old reciever stub? but a little compound on your old stub and work it until the park is gone on your barrel. i got a barrel stub to but alot of people dont so i use it on the receiver.

deepriverman
June 11, 2007, 13:41
Nope, don't have the receiver stub. How about a brush and compound?

chromestarhustler
June 11, 2007, 13:50
dip the threads of the barrel in birchwoodcasey bore scrubber, or vingear iirc it dissolves park. and a few drops on a qtip for inside the reciever, dont get it on anything else.

Edgsmth
June 11, 2007, 15:14
You also want to clean the vinegar off quickly as it will rust rapidly.