View Full Version : Prototype match FAL barrel
August 28, 2001, 15:41
Here's some photos of a prototype match FAL bbl. Sorry the resolution is poor.
See them at http://www.cordite.com/fn/bbl.html
August 28, 2001, 21:59
How about some info on the gas block/tube/piston assy fit? Does it take a standard FAL gas block?
August 29, 2001, 21:57
type of rifling
how often is cutter sharpened
never bent or straightened barrel
August 30, 2001, 13:12
Can one of these be had with the FLUTES and Target Crowned as shown in 14" OAL (threaded in standard L/H configuration) to accept a M/B which will be pinned and Mig'ed in perm. to achieve legal OAL of + 16”?
Who makes the blanks?
Plan to build a William’s/ DSA ELITE Style With functional M/B, William's Scope Mount,(when Avaiable) and DSA L/W Lower (With steel recoil spring tube replaced with Aluminum) supplied from Ted Osborne(GunMasters Gunsmithing)
Also will replace the trigger guard with a L/W from DSA and use a L/W folding C/H and delete the issue P/Grip Nut with a L/W nylon Lock Nut.
Should be a little less than 6 lb.when done.
August 30, 2001, 13:18
Suggest you post in General Discussion also for more feed back.
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.