PDA

View Full Version : Para part question

turrican
October 13, 2006, 21:34
Can anybody tell me what the brass tube in a para set is for? I dont know what it is and where to get one. Thanks
lhofeld
October 13, 2006, 23:26
Brass tube?
Lon Moer
October 13, 2006, 23:35
It connects the two smaller, inner, recoil springs. The two small springs connect together and then slip inside the large, full length, outer recoil spring. Then both sets go into the back of the bolt carrier, followed by lining up the guide rod in the top cover, as you slip it on.
W.E.G.
October 13, 2006, 23:41
Ye olde recoil spring guide tube.


They aren't always made of brass.

But most look pretty much like this.

This part will not endure rough handling either.
Bend it and you're fugked.


http://www.falfiles.com/forums/attachment.php?s=&postid=932592
lhofeld
October 13, 2006, 23:46
Ahhhh yes I had not seen them made of brass.
turrican
October 14, 2006, 01:03
I was looking at falcon arms para parts and theirs looks like brass or something. I am geting a kit that is missing this part so I am trying to locate it.
Thanks for the good advice and the picture of you holding it in your hand was perfect.
turrican
October 14, 2006, 01:09
I wanted to know the part name so I could order it from falcon arms but they just responded to me by email and they can hook me up with one.