PDA

View Full Version : Thread Die 1x16 RH pitch were to find one?


jim6625
March 31, 2002, 12:03
I've been tinkering with the idea of converting one of my fal's to 243 cal. I pick-up a barrel with metric threading and need to rethread. Looking for a Cheap conversion. Any Ideas? Open to opinions. Thanks Jim.... :confused:

jimmieZ
March 31, 2002, 18:12
Metric and inch FAL's are all threaded 1 x 16 tpi except for Izzies which are a 25mm x 1.5 tpmm - they're the only one you would need to chase with a die. If you really need a die (like for an unthreaded barrel) then go to MSC.com and shop.

Jim Z

meeper
March 31, 2002, 20:01
Signman if you don't want to go to the trouble of buying a die I have a barrel that will thread in for $50.00.

meeper
March 31, 2002, 20:02
Signman if you don't want to go to the trouble of buying a die I have a barrel that will thread in for $50.00.