Plans for the Bolt Cutter Riveter?

[Regal Beagal]

Good Evening Folks!
While I watch the Olympics and I'm not far from hitting the rack, my mind switched over to AK Building. Just in time, HBF had their 24" bolt cutters on sale for $8.99. To darn hard to pass up. Anyway, I'm looking for the plans/directions for the grinding and cutting of the jaws turn this bad boy into a riveter. I'm sure their are directions somewhere on the web, if you could just point me in the right direction. Thanks All! RB

[bykerhd]

Here is a link to a very useful site.
pookieweb (http://pookieweb.dyndns.org:61129/AK/docs/construction/construction.htm)
A decent view of modified bolt cutters
modified bolt cutters (http://gunsgutsandgod.com/Newrivettool.htm)

I used a Dremel with ceramic cut-off wheels and the pictures from the second link to make my rivet crusher. Works quite well. Use the 24" cutters to start with. I don't think smaller ones will have enough reach.

[Regal Beagal]

That's What I Was Looking For! Great web sites, especially the first one. Very informative. Thanks! You Folks Rock!

[Mosin Guy]

http://www.surplusrifle.com/shooting2005/souptonuts4/index.asp