View Full Version : Gas Regulator Sleeve Stuck.
September 29, 2001, 20:09
Can't remove the sleeve, it's stuck. I'm doing a through cleaning on my G1 Kit and the regulator doesn't move, much less unscrew. I tried liquid wrench but it doesn't seem to help.
September 29, 2001, 20:25
try breakfree CLP®
spray the regulator nut and let it soak for an hour or so.... then try it
September 30, 2001, 08:40
PB Free from NAPA works pretty good.
September 30, 2001, 08:46
I had the same problem. I let it soak in penetrating oil then took a flat pointed screw driver and a small hammer and gently tapped it....loosened right up.
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.